This machine is
particularly suitable for cutting rough solidwood boards with irregular
shape and defects. The stock is manually positioned on the working
table, and manually repositioned on the cutting line after each sawing
operation against two pneumatic positive stops located on the side of the
machine bed.
This will determine the width size of the finished parts. The
working table is fitted with two adjustable pneumatic clamps to hold down
the uncut workpiece onto the table as it passes through the blade.
Combining advanced
computerized technology with our traditional, proven bandsaw design has
allowed us to manufacture a new evolution of bandsaw which is simple to
program and operate.
This new era in bandsaws provides the ability to saw very difficult
parts (+/- 90° inclination), which until now could only be accomplished
from the hands of a skilled operator.
This is a great step forward in the profiled solid wood processing.
In addition to more precisely sawn parts and higher production speed, the
set-up time takes only a few minutes from one program to another.
These benefits allow you to fully appreciate the technology designed into
the machine to save you money.
The machine's computer control positions three axes, X-Y-C, simultaneously
using the advanced NUM 1020W controller with 128K ram memory standard, but
if required is expandable, providing ample storage for a wide range of
workpiece profiles.
All technical data are displayed on a colour 10" S-VGA monitor.
Axes X-Y are mounted on precision rail tracks and slide units, the motion
is transmitted by ball bearing screws and brushless servo motors.
|
