 |
|
|
Team The end cut-off Molding and Boring machine mod. TEAM is composed of three working units; the circular saw for cutting to length of the workpieces, the vertical spindle for molding and the boring assembly which is equipped with multi-bit drilling heads. All working units are hydraulically controlled. The machine may be used for a variety of job requirements, including end cutting off - curved shoulder molding and boring, or end cutting off - boring, etc. Nine different work programs are available on the machine. They permit the use of all three working units, or two or only one of them, or a different operation succession, according to the type of work required. |
|
Its precision, particularly, relies on design features which make this
machine one of a kind. -the worktable is stationary for all operations, while the different working units (molding unit included) subsequently treat the workpiece as determined by the work program chosen. Even long work pieces can, consequently, be processed with absolute precision; -progressive cutting-off, thanks to the pendulum movement of the blade; -molding unit retraction during return feed. Thanks to this system the cutter will not go over the milling just completed, thus leaving its precision unaltered. The different work programs available and the possibility of executing pieces with three compound angles (the table can, in fact, be tilted sideways) make the machine suitable for innumerable applications. Set-ups are extremely simple: semi-automatic positioning of the working units-precision positioning of the boring head-millimetrated and graduated scales read out systems. |
|
